Tensile failure in Low Density Foams

When modeling low-density foams, it is important to consider potential failure under tensile loading. In LS-DYNA, the most popular constitutive material model is MAT_LOW_DENSITY_FOAM (MAT_057), in which the default treatment of foams under tensile loading is linear with no failure. The Elastic Modulus (Emax) in tension is computed to be the max( max(slope of the…

Viewing Contact Frictional Energy

When friction is enabled in contact treatment using static or dynamic fricition coefficients (FS, FD in *CONTACT), the energy dissipated due to friction can be recorded and visualized. The parameter that tells LS-DYNA to ouput the frictional energy is FRCENG in *CONTROL_CONTACT. FRCENG by default is set to 0 to ignore the recording and output…

Archive

Tensile failure in Low Density Foams

Viewing Contact Frictional Energy